VNISH FIRMWARE FOR OVERCLOCKING AND DOWNVOLT ANTMINER S21 T21

release 1.2.6-rc2

📢 New Features:
– Added support sub-model A3HB70501 for Antminer S21 XP

🐞 Bug Fixes:
– Fixed apply without restart overclocking settings, preset change, etc.
– Fixed Antminer S19i operation
– Fixed setting of voltages during autotune out of power supply range
– Fixed autotune on Antminer S19e XP Hydro
– Fixed an issue with applying the Chinese lang

release 1.2.6-rc1

📢 New Features:
– Patented Chip Throttling now included Hashrate compensation utilizing cooler chips to keep high performance!
– Added Chinese language support
– NEW: Consumption graph added for detailed monitoring
– Markings added on chips with frequency adjustments due to throttling (x21 series)
– Support added for Antminer S21 XP Hydro, S21 XP Immersion and T21 with Xilinx ctrl
– Ignore Fan Speed autoswitcher option now can be ignored in auto mode when raising presets
– Add ignore broken chains on PIC/NOPIC miners

🚦 Improvements:
– Default voltage decreased for Antminer S19 XP
– Corrected presets for Antminer S19e XP Hydro, S19(76 chips) with Xilinx ctrl
– Updated presets for Antminer L7 and S19i models
– Fixed occasional EEPROM corruption issue
– Fixed immersion mode reset to auto
– Accelerated reading of EEPROM’s on all control boards except XIL
– Improved performance of autoswitcher and autotune features
– Enhanced miner stability
– Various UI/UX fixes

🐞 Bug Fixes:
– Resolved issue preventing firmware start after CV update
– Fixed display of active pools in the old API (4028)
– Fixed programmatic disconnection of boards
– Adjusted cooldown timing in Hydro and Immersion modes to prevent extended cooling periods (2min)
– Fixed voltage return issue during adjustment
– Fixed chain break detected on Antminer S19 with Xilinx ctrl
– Fixed voltages setting on Xilinx ctrl
– Corrected sensor reading errors on Antminer S21 Pro and Xilinx ctrl models

💻 API Changes:
– Added hr_nominal to the summary field for miner theoretical hashrate
– New fields build_uuid and build_name added to info requests
– New field power_consumption added to metrics requests
– New field throttled added to’chips’ requests

release 1.2.6-alpha5

📢 New Features:
– Chip Throttling: Now available for the x21 series (excluding S21 Pro).
– Expanded Miner Support:
– Antminer T19 Pro Hydro
– Antminer S21 XP
– Antminer S19j XP
– Antminer S19e XP Hydro
– New Settings:
– Preset switcher: Ignore fan speed and Auto lowering top preset options added.
– PSU Update: Added PSU model name for 0x64.
– Pool Updates: Default pools updated for Antminer L7.

🚦 Improvements:
– Autotune Efficiency: Autotune algorithm is now more effective.
– Deprecated Features:
– Removed Hotel Pool.
– Removed the “Fees” tab.
– Restart Configs: The max_restarts field now defaults to disabled (set to 0).
– Additional Presets: New presets available for Antminer S19j Pro+ and Antminer S21.

🐞 Bug Fixes:
– Antminer S21 Pro Sensor: Fixed sensor reading issues for S21 Pro.
– Immersion Mode: Fixed prolonged cooling periods in immersion mode.
– Voltage Configs: Corrected default voltage settings for Antminer S19-88 and S19-126.

💻 API Changes:
– API Response: Now only includes active chains. Disabled/disconnected chains will be excluded from the API response.

release 1.2.6-alpha4

📢 New Additions:
– Added support for Antminer S21 Imm and Antminer S21 Pro
– Added ‘board_model’ and for miners that don’t have information in EEPROM’s we set an identifying variable

🚦 Changes:
– Updated presets for Antminer S19j Pro and Antminer S19Pro+ Hydro

🐞 Bug Fixes:
– Fixed crashing if there are no user pools on the miner
– Fixed disabling chain if preset is selected
– Fixed an issue where a miner could get stuck in a loop reconnecting to a pool or improperly configured proxy.

💻 API Changes:
– Added ‘psu_model’ and ‘psu_serial’ to request factory-info

release 1.2.6-alpha3

📢 New Additions:
– Added support for submodel (BHB68603-) of Antminer S21
– Added lower preset for Antminer S19a and Antminer S19XP
– Added the ability to edit tuned presets

🚦 Changes:
– Logs are not saved after reboot on Cvitek
– Changed the name of the diagnostic reports and fixed double archiving
– Increased the maximum speed of fan coolers to 90% for preset raising. Now if the speed is less than 90%, the preset will raise it
– Improved handling of pools
– Enhanced miner stability
– Fixed dashboard layout
– UI/UX changes

🐞 Bug Fixes:
– Fixed the pause when switching presets
– Fixed parse EEprom’s for Antminer L7
– Fixed AML sd update

release 1.2.6-alpha2

📢 New Additions:
– Added support for submodels BHB68606 and BHB68603P of Antminer S21
– Dump EEPROM’s in case of decoding error

🚦 Changes:
– Minimum speed of coolers during pause reduced to 0% (for known models that can stop at 0 – Nidec)
– Changed RISE to 85°C and DECREASE temp to 90°C
– Made UI/UX fixes

🐞 Bug Fixes:
– Fixed error of setting frequencies at low ambient temperature
– Fixed preset change during decrease to working voltages

release 1.2.5

📢 New Additions:
– Added support for Antminer S21 (Amlogic), Antminer S21 Hydro, Antminer T21 (Amlogic/Cvitek), Antminer T19 Hydro, Antminer T21(BHB68703), Antminer S19k Pro (Xilinx), Antminer S19k Pro (BHB56903/BHB56903-/BHB56902-)
– Added widget Performance
– Introduced new presets: preset 9250MH for Antminer L7, lower presets for Antminer S19, and new presets for Antminer S19 Hydro, S19Pro Hydro, and S19Pro+ Hydro
– The dashboard now displays Hashboard factory information and Hashboard temperature after overheating
– Added features for preheating chips and voltage adjustment in automatic cooling mode
– Logs are now saved after reboot
– Invalid CRC EEPROMs are ignored

🚦 Changes:
– Now supports the previous format of autotune.json without serial number (1.2.0/1.2.1)
– Reduced the minimum difference between switching temperatures to 5 degrees Celsius
– Recalibrated chip temperature for x21 series
– Updated water temperature checks on Hydro miners
– Adjusted chip temp offset for Hydro miners
– Enhanced autotuning functionality
– Corrected profiles for Antminer S19i and S19 Hydro
– Raised the critical temperature threshold to 120°C
– LEDs now blink faster when activating find miner
– Made minor UI/UX adjustments
– Enhanced miner stability

🐞 Bug Fixes:
– Fixed minimum hashrate check when quick start is enabled
– Fixed cooling down for automatic/manual fan mode
– Resolved false virus detection on Cvitek firmware
– Fixed double compression (diagreport/backup)
– Corrected /docs route
– Fixed memory leaks and firmware hangs on Cvitek
– Resolved configuration loss after power loss
– Improved autotune for Antminer S19i
– Fixed chip detection issue on Antminer S19k Pro
– Resolved double pause issue
– Fixed dashboard hangs with a large number of connections
– Fixed voltage adjustment in immersion and manual cooling mode
– Fixed work with L7 sensors

💻 API Changes:
– Added max_rpm parameter in the fans object on the /summary response
– Added hr_stock to the /summary response
– Introduced new /chains and /factory-info routes on the API

release 1.2.5-rc2

Added 📢
– Add support of Antminer S21 Hydro
– Add preset 9250MH for Antminer L7
– Add new response ‘factory-info’ in API
– Add show chain factory info
– Ignore fans with extra large rpm readings
– Show chain temp after overheated
– Ignore invalid eeprom
– Save logs after reboot

Changed 🚩
– Correct temp sensor position for Antminer S21/T21
– Correct profiles for Antminer S21/T21
– Correct presets for Antminer S19 Hydro/S19Pro Hydro
– Chip temperature recalculation for x21 series
– Remove ‘asic_boost’ from settings in API

Fixed ✅
– Fix for minimum hashrate check when quick start is enabled
– Fix cooling down for fan auto/manual mode
– Fix double compression in Safari

 release 1.2.5-beta1

• Add support x21 series
• Add support submodel Antminer S19k Pro (BHB56903)
• Add support Antminer S19k Pro on Xilinx
• Add show chain serial number and hashrate on logs
• Add Performance widget: * When you first install firmware – the widget will be right on the dashboard. * For those who update the firmware, for the widget to appear you need to take it out of the list of widgets.

Changed

• Correction of Antminer S19i profiles
• Minor changes

Fixed

• Fixed detect chips on Antminer S19k Pro
• Fixed double pause when pausing through monitoring
• Fixed false positives of Microsoft antivirus (CVITEK)
• Fixed dashboard hangs with large number of connections